721N VIS Spectrophotometer

721N VIS Spectrophotometer has ?the holographic blazed grating monochromator has the advantages of high wavelength accuracy, good monochromaticity and low stray light.

721G VIS Spectrophotometer

721G VIS Spectrophotometer been widely used in colleges and enterprises for general quantitative analysis and experiments based in absorbance measurements.

XRY-1C Oxygen Bomb Calorimeter

Summary    The instrument is designed and made as per GB/T213 “Test Methods for Calorific Value of Coal”, GB/T384 “Test Methods for Calorific Value of Petroleum Products” and Calibration and

XRY-1A+ Oxygen Bomb Calorimeter

SummaryThe instrument is designed and made as per the National Standard of People’s Republic of China GB/T213-2008 and ASTM D240 Test Method for Calorific Value of coal, GB/T384-1988 Test Method for

XRY-1A Oxygen Bomb Calorimeter

Product Introduction SummaryThe instrument is designed and made as per national standards of People’s Republic of China GB/T213-2008 Test Method for Calorific Value of coal, GB/T384-1988 Test Method

SYD-0752 Wet Wheel Abrasion Tester

Summary  The instrument is designed and made as per ASTM G105 and T0752-2011 “Wet Wheel Abrasion Test Method for Slurry Mixtures ” in the Industrial Standard of People’s Republic of China JTG E2

SYD-0615 Wax Content Tester

Summary   This instrument is designed and made as per standards T 0615-2011 and ASTM D721 Wax Content Test for Bitumen by distillation in JTG E20-2011 Specification and Test Methods of Bitumen and Bi

SYD-0711A Bituminous Mixtures Theoretical Maximum Specific Gravity Tester

Summary  This instrument is designed and made as per T 0711-2011 and ASTM D2041 Standard Test Method for Theoretical Maximum Specific Gravity of Bituminous Mixtures(Vacuum process) in JTG E20-2011.It

SYD-0621-1 Asphalt Standard Viscometer

Summary    The instrument is designed and made as per T0621 Asphalt Standard Viscosity Test in the Industry Standard of People’s Republic of China JTG E20-2011 Specifications and Test Methods of Bi

SYD-0623 Saybolt Viscometer

Summary   The instrument is designed and made as per T 0623 and ASTM D88 Bitumen Saybolt Viscosity Test (Saybolt Viscometer Method) in the JTJ052 Standard Test Methods of Bitumen and Bituminous Mixtur

SYD-0610 Asphalt Rolling Thin Film Oven

Summary  This instrument is designed and made as per industrial standard T 0610-2011 and ASTM D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt in JTG E20-2011 Standard

SYD-0609 Asphalt Thin Film Oven

Summary   The SYD-0609 Asphalt Thin Film Oven(82 type oven for short) is design and made as per T0609-1993 Thin Film Oven Test in the industrial standard of People’s Republic of China JTG E20-20

SYD-2801E1 Penetrometer

Summary  This instrument is designed and made as per T0604 Penetration Test for Bituminous Materials in JTG E20 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering

SYD-2801H Automatic Penetrometer

SummaryThe instrument is designed and made as per the standards GB/T4509 Standard Test Method for Penetration of Bitumen, T0604 Bitumen Penetration Test in the standard JTG E20-2011 Specificatio

SYD-2801F Low-Temperature Penetrometer

SummaryThis instrument is designed and made as per T0604-2011 Penetration Test for Bituminous Materials in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway E

SYD-0653 Emulsified Asphalt Particles Ionic Charge Tester

Summary  This instrument is designed and made as per T 0653 Emulsified Asphalt Particles Ionic Charge Test in Chinese industrial standard JTG E20-2011 Specification and Test Methods of Bitumen and Bit

SYD-0728 Bituminous Mixtures Bending Beam Rheometer

Summary   This instrument is made and designed as per ASTM D6648 and T0728-2000 Bending Beam Test of JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering. It

SYD-0709 Marshall Stability Tester

SummaryThis instrument is designed and made as per industrial standard T0709-2011 and ASTM D6927 in TG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineeri

SYD-0709 Marshall Stability Tester

   SummaryThis instrument is designed and made as per industrial standard T0709-2011 and ASTM D6927 in TG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engi

SYD-0755 Load Wheel Rolling Tester

Summary   The instrument is in accordance with People's Republic of China Ministry of Transportation standards JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engin